manualshive.com logo in svg

Leica BIOSYSTEMS Aperio AT2 DX, User Manual

Share
Download
Leica BIOSYSTEMS Aperio AT2 DX User Manual Download Page 14

Aperio AT2 DX User’s Guide, Revision A © Leica Biosystems Imaging, Inc. 2019

14

Chapter 2:  Startup and Shutdown

Calibration and Verification

The Aperio AT2 DX scanner is calibrated and verified at the factory before shipment. During installation, a Leica Biosystems  
technician also performs calibration and operational verification.

We recommend annual preventive maintenance, performed by Leica Biosystems Technical Services, to make sure the 
scanner is operating correctly. For scanner maintenance you can perform yourself, see 

“Chapter 7: Quality Control and 

Maintenance” on page 40.

The scanner provides automatic calibration and verification every time a slide is scanned by performing calibration during 
the scan. For customer calibration instructions, see 

“Calibration” on page 31.

The monitors provided with the Aperio AT2 DX System have been calibrated at the factory and may 
require periodic re-calibration in the field by authorized Leica Biosystems technicians. Contact your 
Leica Biosystems Technical Services representative for information. Do not attempt to change the 
monitor display settings, as doing so may interfere with the monitor calibration.

Summary of Contents for Aperio AT2 DX



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands