manualshive.com logo in svg

Leica BIOSYSTEMS Aperio AT2 DX, User Manual

Share
Download
Leica BIOSYSTEMS Aperio AT2 DX User Manual Download Page 11

Aperio AT2 DX User’s Guide, Revision A © Leica Biosystems Imaging, Inc. 2019

11

Chapter 1:  Introduction

Instrument Warnings

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE 
SCANNER TO RAIN OR MOISTURE.
MISUSE OF ELECTRICAL EQUIPMENT CAN CAUSE ELECTROCUTION, BURNS, FIRES, AND 
OTHER HAZARDS.

Compliance Specifications

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may 
not cause harmful interference and (2) this device must accept any interference received, including interference that may 
cause undesired operation.

This device has been evaluated against and conforms to the following standards:

Feature

Details

Safety

 

    

Low Voltage Directive 2006/95/EC
CAN/CSA-C22.2 No. 61010-1/R:2009
CAN/CSA-C22.2 No. 61010-2-081:2004
CAN/CSA-C22.2 No. 61010-2-101:2004
UL 61010-1/R:2008-10
EN 61010-1: 2001
IEC/EN 61010-2-081/A1:2003
IEC/EN 61010-2-101:2002

EMC

EMC Directive 2004/108/EC
IEC/EN 61326-1: 2006; Class A
FCC Part 15 Sub Part B

Installation

CAUTION:

 Two people are required for lifting the scanner.

Installation and setup of the scanner should only be performed by a trained Leica Biosystems Technical Services 
representative. 

Summary of Contents for Aperio AT2 DX



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands