Leibinger JET3, Operating Manual

Page: 259 / 406

Group 8 Job Editor Page 257
JET3 Series Release 2.02
8.5.1.2 Font width - Stroke distance
The setting determines the print width. The print width is determined by the horizontal
drop distance of the strokes. A
stroke is one vertical movement of the ink jet. The input
dimensions corresponds with the dimensions selected in the <Basic settings > menu
e.g. mm.
The value set is displayed in the respective input field.
As higher the entered value, as larger the distance between each stroke.
Figure 137 Font parameters - Font width
8.5.1.3 Orientation
There are three options available to change the orientation of the printband.
The printband can be rotatetd by 180°
→ checkbox ( 1)
The printband can be vertically mirrored → checkbox (2)
The printband can be rotated and mirrored → checkbox (1) + (2)
There is a preview window below the checkboxes in order to check the results.
ATTENTION
The settings not only have an effect on single printing objects but on
the complete print-band!
Figure 138 Font parameters - Orientation of the print band
1 – Checkbox <Orientation> 3 – Preview
2 – Check box <mirrored>
180°
180°
1
2
3