Page 28
Safety
Group 2
Release R1.06
JET3up
2.11
Conformity
Extract of declaration of conformity
according to machinery directive (2006/42/EG), Appendix II 1.A
according to low-voltage directive (2006/95/EG)
according to EMC directive (2004/108/EG)
…complies with the provisions of the above mentioned directives –including the
changes which valid at that time of the declaration. The following harmonized
standards have been applied:
DIN EN ISO 12100
Safety of machinery – General principles for design – Risk
assessment and risk reduction
DIN EN 60950-1
Information technology equipment – Safety;
part 1: General requirements
DIN EN ISO 13732-1
Ergonomics for the thermal environment – Methods for the
assessment of human responses to contact with surfaces;
part 1: Hot surfaces
EN 61000-6-2
Electromagnetic compatibility (EMC) – part 6-2:
Generic standards – Immunity for industrial environments
EN 61000-6-3
Electromagnetic compatibility (EMC) – part 6-3:
Generic standards – Emission standard for residential, com-
mercial and light-industrial environments
For that product the relevant technical documentation were compiled according to
Annex VII part A of the machinery directive, on a resended request this documents
can be transmitted to national authorities per CD.
Name and address of the person who is authorised to arrange the technical
documentation:
Volker Teufel, authorised documentation agent, Paul Leibinger GmbH & Co. KG, D-
78532 Tuttlingen (Germany)
Annotation:
The device fulfills the fundamental health and safety requirements of the directive
94/9/EU,
but is intended only for use outside of explosive areas
.
This declaration is
only va
l
id for the components which are included in the delivery range of the
manufacturer. Installation work and components supplied by the customer or the
distributor is not in the scope of responsebilies of the manufacturer. The adherence
to valid standards and recognized rules of engineering are generally in the scope of
responsibilities of the customer respectively the distributor
.
Summary of Contents for JET3 up
