Group 8
Job Editor
Page 169
JET3up
Release R1.06
7.4.3
Printhead functions
On the
<Print head>
tab the following functions are available:
Ink-Flow-Sensor active
Piezo Test
Jet Adjust
Extern Ink on/off active
Charge Test
Ink on/Ink off
Detector Test
Figure 73
Printhead tab
1 – <Ink-Flow-sensor active> Button
6 – <Charge Test> Button
2 – <Ink on> Button
7 – <Detector Test> Button
3 – <Ink off> Button
8 – <Jet Adjust> Button
4 – <Extern Ink on/off active> Button 9 – Current during open/close nozzle
5 – <Piezo Test> Button
10 – Open/Close nozzle stepwise
6 – <Charge Test> Button
11 – Display <Drop-Break-Off-Curve>
7.4.3.1
Jet monitoring - Ink-Flow-Sensor active
The ink jet monitoring provides highest operating reliability due to the additional
monitoring of the ink backflow. The full automatic monitoring turns off the ink jet
as soon as the ink backflow is interrupted. The nozzle seal will be closed
automatically and head impurities are therefore prevented.
By pressing the button
<Ink-Flow-Sensor active>
(1)
the jet monitoring is turned
on or off.
An activated jet monitoring is designated by a
on the button.
3
1
4
2
5
6
7
10
11
8
9
Summary of Contents for JET3 up
