30
_________________________________________________________________________________
7. TRANSPORTATION
Before transportation lower the booms down to transport position and lift the outriggers completely up
to transport position.
NOTE! Transporting of this access platform is allowed in its transport position only.
No persons or materials are allowed to be transported on the platform.
All outriggers are equipped with lifting points (Figure 12) from which the access platform can be lifted
if necessary. When lifting, it is advisable to use a lifting beam where the ropes are mounted, in order
to prevent the outriggers from being damaged.
There is an automatic hydraulic brake in the rear axle which engages automatically when the
combustion engine/ electric motor is not running.
The access platform must not be parked in steep
slopes.
If the machine is transported on a trailer or on a lorry or a similar vehicle, it must be tied down
properly. There are four tie-down points marked on the corners of the chassis which make it easy to
tie down the machine. Always tie the machine down diagonally from every corner (Figure 13).
ATTENTION! It is not allowed to tie down the machine so that the ropes go over the
booms. Only marked tie-down points can be used!
Figure 12: Lifting the access platform
Figure 13: Tie-down points
