29
_________________________________________________________________________________
6.5 Boom transport position monitoring override
For possible emergency situations this access platform is equipped with boom transport position
override button
(Figure 5 (20))
. This feature allows the user to operate the outriggers and drive the
access platform to a safe area in an emergency. The feature is meant to be used in a fault situation
when one of the booms is not in transport position or if one of the transport position sensors and/or
the boom angle/outreach sensor is faulty and prevents the operation of outriggers and drive.
Use with
extreme caution and only in an emergency!
The override button is locked with a hexagon screw. Unlock the lid to operate the button.
Boom transport position monitoring override at platform:
1. Turn on the main switch
(figure 6 (1))
to lower control position
2. Within 1-10 seconds after the machine has turned on, push down the override button
(figure 5
(20))
in the platform control panel (pushing down the button switches the controls to the upper
control panel from the lower control panel)
3. Keep the override button pushed down the whole time you wish to use the function
4. Start the engine or electric motor from the platform control panel
(figure 5 (1))
while holding
down the override button
5. While pushing down the button, use the outrigger switches to drive the outriggers up towards
transport position or drive levers
(figure 10 (1))
to move the access platform to a safe area
6. If you release the override button too early, you have 10 seconds to press it again to keep the
override function activated
7. After the operation is
finished, lock the override button’s lid with the provided hexagon screw to
prevent unnecessary use.
When using safety functions override button, it is possible to operate the machine outside its stable
working zone, which creates a falling hazard! The manufacturer is not responsible for the lifts falling
when safety functions override button has been used!
