Creating a Multicast Flow
D
ANTE
C
ONTROLLER APPLICATION
To allow one audio channel from the host device to go to the speaker and also serve as the AEC
reference signal that goes to the four microphones in our example set-up, define a multicast flow
containing only that channel.
To define the multicast flow:
1. Select Device : Device View, and go to the Transmit tab.
2. Select the Multicast icon (labeled 1 in this screen shot).
3. Select the output from the host device. In this case we're using Mix Output 1.
4. Select Create.
Now Mix Output 1 is available to every device that can receive it – the speaker and the four microphones.
These devices will only use the channel in the multicast flow if it is routed to them.
Complete Manual for the EasyIP CeilingMIC/AMP D Network-Connected Amplifier and Overhead Microphone
14
