camera zoom
Zooms the camera in toward the subject or out away from the subject.
Synopsis
camera zoom { in [<speed>] | out [<speed>] | stop | get | set}
Options
in
Moves the camera in.
out
Moves the camera out.
speed
[1 – 7]
Optional: Specifies the zoom speed as an
integer (1 to 7). Default speed is 3.
stop
Stops the camera's zoom movement.
get
Returns the camera's current zoom level as a
floating point value.
set
<1 – n>
Sets the zoom level as a floating point value
from 1.00 to 30.00.
If the value is out of range, the camera returns
an error message and no zoom change occurs.
The speed parameter may be used with the
camera zoom set
command.
The
camera zoom set
command blocks
execution of subsequent commands until the
camera reaches the specified position. Use the
no_wait
parameter if this is not the desired
behavior.
Examples
>
camera zoom in
OK
>
Zooms the camera in at the default speed.
>
camera zoom stop
OK
>
Stops the camera's zoom motion.
>
camera zoom set 8 3
OK
>
Sets the camera's zoom level to 8x at a speed of 3.
>
camera zoom get
8
OK
>
Returns the camera's current zoom level.
51
Complete Manual for the RoboFLIP 30 HDBT In-Ceiling HD PTZ Camera