.
Technical Data
2.
Key
3.
Installation
4.
Putting into operation
5.
Setting the time
6.
Programming the timer
7.
Changing programmed switching times
8.
Deleting a switching command
9.
Other programming possibilities
0.
Manual switching
.
Unusual/No display
2.
Safety instructions
3.
Warranty
4. Illustrations
1. tECHnICAL DAtA
• For installation on top hat rail
• 8 Possible programs per day or week, through block formation (e.g. MO-FR, SA-SO etc.) up to 64 switching operations possible
• Minimal switching interval - minute
• ON-auto-OFF manual switch
• Contact rating: 3600 W max., 6 A, 460 VA / 2 A inductive
• 220-240 V∼, 50 Hz
• Backup system for power failure
• Floating changeover contact
2. kEY
MO
= Monday
ON = ON
TU
= Tuesday
OFF = OFF
WE
= Wednesday
AUTO = Automatic
TH
= Thursday
FR
= Friday
SA
= Saturday
SU
= Sunday
RES/RCL = Deletes individual programs
R
= Reset
C+
= Time setting
π
= Program
Manual = Manual switch
3. InStALLAtIOn
. Installation may only be carried out by a skilled person and in accordance with the VDE regulations. Work only when there is no
electricity present. To ensure this, it is essential to switch off the circuit fuse. Check whether the connection lead is de-energised!
2. Install the timer on the DIN standard rail (top-hat rail) in the circuit-breaker board.
3. For continuous voltage, now connect Phase and the neutral conductor to te2 (Figure 2). The switching contact is a potential-
free changeover contact: Connect phase L to terminal 4. Terminal 3 is a NC contact (closed when switched off), terminal 5 is a NO
contact (closed when switched on), see Figure 2.
4. You can now apply the voltage and begin programming.
4. PUttInG IntO OPERAtIOn
The timer has .5 V rechargeable batteries. Before putting into operation, the batteries must be charged. Press the
Reset
button of
the timer. You can then program the timer as described below. If you no longer need the timer, dispose of the installed rechargeable
batteries correctly at a collection point.
The week timer should be connected occasionally for at least two hours if it is not in use for an extended period so as to maintain the
capacity of the rechargeable batteries.
DIGITAL WEEKLY PROGRAMMER mod. SUL182H
Distribuidor: ELECTROCONTROL
Cnel. Rosetti 3637 - (1636) OLIVOS/ Bs. Aires - tel. 4799-3672/15-5060-0100 / fax 4799-3672
e-mail:[email protected] http://www.electro-control.com.ar
