Appendix D: Raw Configuration Upload and Download
582
Parameter
Description
<user>
,
<password>
,
<device IP>
,
<config
file>
Refer to the above table for explanation.
For device-specific settings in the
<config
file>
, refer each device-specific
configuration key to a specific column in the
<dev_list file>
. See
config.txt
(on page
<dev_list
file>
Filename of the device list file in CSV format.
For the content format, see
devices.csv
(on
page 549).
<dev_col>
<dev_col>
comprises "serial:" or "mac:" and
the number of the column where the serial
number or MAC address of each SRC is in the
uploaded CSV file. This is the data based on which
each device finds its device-specific settings.
For example:
If the second column contains each device's
serial number, the parameter is then
serial:2
.
If the seventh column contains each device's
MAC address, the parameter is then
mac:7
.
2.
SRC will reboot after Curl shows the return code 0. For details, refer
to above steps 2 to 3.
Examples:
Upload of the configuration file only:
curl -k -F "[email protected]"
https://admin:[email protected]/cgi-bin/raw_config_download.cgi
Upload of both configuration and device list files:
curl -k -F "[email protected]" -F "[email protected]"
https://admin:[email protected]/cgi-bin/raw_config_download.cgi
Summary of Contents for Raritan SRC-0100
