LEGRAND Raritan SRC-0100, User Manual

Page: 56 / 698

Chapter 4: Connecting External Equipment (Optional)
44

For SRC without onboard door handle ports, such as SRC-0100, you
need a SmartLock kit. See
Connecting a SmartLock Kit to
DX2-DH2C2
(on page 45).

For SRC with onboard door handle ports, such as SRC-0102, you can
only purchase and connect Raritan's door handles instead of a
SmartLock kit. See
Connecting Raritan's Door Handles to SRC
Onboard Ports
(on page 47).
Such models support a maximum of four door handles. Therefore,
you can purchase a SmartLock kit and connect it to your SRC if you
want your SRC to support up to four door handles.
Limitations
Read the restrictions below before connecting door handles or a
SmartLock kit (that is, DX2-DH2C2 kit) to SRC.

(IMPORTANT) NO asset management strips can be connected
simultaneously.

Up to one DX2-DH2C2 can be connected per SENSOR port of SRC.

SRC-0100 supports a maximum of 2 door handles by connecting
one DX2-DH2C2.

SRC-0102 has two onboard door handle ports so it supports a
maximum of 4 door handles. You can connect two door handles
to onboard door handle ports and connect one DX2-DH2C2 to its
SENSOR port.

Only the door handles sold with DX2-DH2C2 are supported.

No hot plugging or hot swapping with door handles when they are
directly or indirectly connected to a
powered SRC.

That is, no connection or disconnection of door handles when
they are powered.

The maximum cabling length for door handles or SmartLock kit is 29
feet (9 meters). For details, refer to the following diagram.