LEGRAND Raritan SRC-0100, User Manual

Page: 452 / 698

Chapter 8: Using the Command Line Interface
440
Enabling or Disabling Service Advertising
This command enables or disables the zero configuration protocol,
which enables advertising or auto discovery of network services. See
Enabling Service Advertising
(on page 207) for details.
config:# network services zeroconfig <method> <option>
Variables:

<method> is one of the options:
mdns or llmnr.
Option Description
mdns Service advertisement via MDNS is enabled or
disabled.
llmnr Service advertisement via LLMNR is enabled or
disabled.

<option> is one of the options: enable or disable.
Option Description
enable Service advertisement via the selected method
(MDNS or LLMNR) is enabled.
disable Service advertisement via the selected method
(MDNS or LLMNR) is disabled.
Examples
This section illustrates several network configuration examples.
Example 1 - Wireless Networking Mode
The following command enables the wireless networking mode.
config:# network wireless enabled true
Example 2 - Enabling IPv6 Protocol on the Ethernet Interface
The following command enables the IPv6 protocol on the ETH1 interface.
config:# network ipv6 interface eth1 enabled true