LEGRAND Raritan SRC-0100, User Manual, Page: 126 / 698

Chapter 6: Using the Web Interface
114
States Description
"Activation Reason" is displayed, indicating why
the beeper sounds an alarm.
For example, if the beeper is turned on because of
a specific event rule "XXX," the activation reason
looks like:
Event Action triggered by rule: XXX
See
Event Rules and Actions
(on page 237).
+12V Power Supply Sensor
The SRC's controller receives DC 12V power from its inlet. A sensor
monitors the power supply status and indicates it on the SRC page.
State Description
OK The SRC controller is receiving power from its own
inlet.
fault The SRC controller cannot receive power from its
own inlet because of a power failure on the inlet or a
broken 12V power supply.
unavailable The communication with the 12V power supply
sensor is lost.
Alternatives for checking the 12V power supply status:

Dot-matrix LCD panel. See SRC (on page 80).

CLI command:
show src details
. See
Using the Command Line
Interface (on page 374).