LEGRAND Raritan PX3TS, User Manual

Page: 798 / 911

Appendix G: LDAP Configuration Illustration
778
Step B. Configure User Groups on the AD Server
You must create the groups (roles) for the PX3TS on the AD server, and then
make appropriate users members of these groups.
In this illustration, we assume:
•
The groups (roles) for the PX3TS are named PX_Admin and PX_User .
•
User accounts pxuser , pxuser2 , usera and userb already exist on the AD
server.
To configure user groups on the AD server:
1. On the AD server, create new groups -- PX_Admin and PX_User .
Note: Refer to the documentation or online help accompanying Microsoft
AD for detailed instructions.
2. Add the pxuser2 and usera accounts to the PX_User group.
3. Add the pxuser and userb accounts to the PX_Admin group.
4. Verify whether each group comprises correct users.