LEGRAND Raritan PX3TS, User Manual

Page: 476 / 911

Chapter 7: Using the Web Interface
456
2. Click the 'Console baud rate' field to select the baud rate intended for
console management.
Note: For a serial RS-232 or USB connection between a computer and the
PX3TS, leave it at the default (115200 bps).
3. Click the 'Modem baud rate' field to select the baud rate for the modem
connected to the PX3TS.
The following modem settings/fields appear in the web interface after the
PX3TS detects the connection of an analog or GSM modem.
To configure the analog modem:
1. Select the 'Answer incoming calls' checkbox to enable the remote access
via a modem. Otherwise, deselect it.
2. Type a value in the 'Number of rings before answering' field to determine
the number of rings the PX3TS must wait before answering the call.
To configure the GSM modem:
1. Enter the SIM PIN code.
2. Select the 'Use custom SMS center number' checkbox if a custom SMS
center will be used.
▪
Enter the SMS center number in the 'SMS center' field.
3. If needed, click Advanced Information to view detailed information about
the modem, SIM and mobile network.
4. To test whether the PX3TS can successfully send out SMS messages with
the modem settings:
a. Enter the number of the recipient's phone in the Recipient Phone
field.
b. Click Send SMS Test to send a test SMS message.
Lua Scripts
If you can write or obtain any Lua scripts, you can create or load them into the
PX3TS to control its behaviors.
Raritan also provides some Lua scripts examples, which you can load as
needed.
Note: Not all Raritan Lua script examples can apply to your PX3TS model. You
should read each example's introduction before applying them.
You must have the Administrator Privileges to manage Lua scripts.