LEGRAND Raritan PX3-3000 Series, User Manual

Page: 912 / 977

Appendix L: Additional PX3 Information
891
Reserving IP in Windows
To reserve the IP address of any network interface in the Windows DHCP
server, you must convert that interface's client identifier into
hexadecimal ASCII codes.
For each interface's client identifier, see Reserving IP Addresses in
DHCP Servers (on page 889).
In the following illustration, it is assumed that the PX3 serial number is
PEG1A00003.
Windows IP address reservation illustration:
1. Convert the client identifier of the desired network interface into
ASCII codes (
hexadecimal).
Interface Client identifier conversion
ETH1 PEG1A00003 = 50 45 47 31 41 30 30 30 30 33
ETH2 PEG1A00003-ETH2 = 50 45 47 31 41 30 30 30 30 33 2D
45 54 48 32

The suffix comprising the dash symbol and the
word "ETH2" is also converted.
WIRELESS PEG1A00003-WIRELESS = 50 45 47 31 41 30 30 30 30
33 2D 57 49 52 45 4C 45 53 53

The suffix comprising the dash symbol and the
word "WIRELESS" is also converted.
BRIDGE PEG1A00003 = 50 45 47 31 41 30 30 30 30 33
2. In your DHCP server, bring up the New Reservation dialog, and
separate the converted ASCII codes with spaces.
For example, to reserve the ETH1 interface's IP address, enter the
following data in the dialog.
Field Data entered
IP address The IP address you want to reserve.
MAC address The following ASCII codes.
50 45 47 31 41 30 30 30 30 33
Other fields Configure as needed.