LEGRAND Raritan PX3-3000 Series, User Manual

Page: 577 / 977

Chapter 8: Using the Command Line Interface
556
Setting the Outlet Relay Behavior
This section applies to outlet-switching capable models only.
This command syntax determines the relay behavior of all outlets on a
PX3 model.
config:# pdu relayBehaviorOnPowerLoss <option>
Variables:

<option> is one of the options:
latching or nonLatching.
Note: For more information on the outlet relay behavior, see PX3
Latching Relay Behavior
(on page 178).
Setting the Outlet Power-On Sequence
This section applies to outlet-switching capable models only.
This command sets the outlet power-on sequence when the PDU powers
up.
config:# pdu outletSequence <option>
Variables:

<option> is one of the options: default, or a comma-separated list of
outlet numbers.
Option Description
default All outlets are switched ON in the ASCENDING
order (from outlet 1 to the final outlet) when the
PX3 powers up.
A comma-
separated list
of outlet
numbers All outlets are switched ON in the order you
specify using the comma-separated list.
The list must include all outlets on the PDU.
Note: Power-on sequencing is disabled in the latching mode. See PX3
Latching Relay Behavior
(on page 178).