LEGRAND Raritan PX3-3000 Series, User Manual

Page: 552 / 977

Chapter 8: Using the Command Line Interface
531
Outlet Sensor Threshold Information
This command syntax shows the specified outlet sensor's
threshold-related information.
# show sensor outlet <n> <sensor type>
To show detailed information, add the parameter "details" to the end of
the command.
# show sensor outlet <n> <sensor type> details
Variables:

<n> is the number of the outlet whose sensors you want to query.

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor
lineFrequency Line frequency sensor
Displayed information:

Without the parameter "details," only the sensor reading, state,
threshold, deassertion hysteresis and assertion timeout settings of
the specified outlet sensor are displayed.

With the parameter "details," more sensor information is displayed,
including resolution and range.

If the requested sensor type is not supported, the "Sensor is not
available" message is displayed.