LEGRAND Raritan PX3-3000 Series, User Manual

Page: 415 / 977

Chapter 6: Using the Web Interface
394
Security level Description
"noAuthNoPriv" Select this if no authorization or privacy protocols
are needed.
"authNoPriv" Select this if authorization is required but no
privacy protocols are required.

Select the authentication protocol - MD5 or
SHA

Enter the authentication passphrase and then
confirm the authentication passphrase
"authPriv" Select this if authentication and privacy protocols
are required.

Select the authentication protocol - MD5 or
SHA

Enter the authentication passphrase and
confirm the authentication passphrase

Select the Privacy Protocol - DES or AES

Enter the privacy passphrase and then confirm
the privacy passphrase
Start or Stop a Lua Script
If you have created or loaded a Lua script file into the PX3, you can have
that script automatically run or stop in response to a specific event.
For instructions on creating or loading a Lua script into this product, see
Lua Scripts
(on page 440).
To automatically start or stop a Lua script:
1. Choose Device Settings > Event Rules > .
2. Select 'Start/stop Lua script' from the Action list.
3. In the Operation field, select 'Start script' or 'Stop script.'
4. In the Script field, select the script that you want it to be started or
stopped when an event occurs.

No script is available if you have not created or loaded it into the
PX3.
5. To apply different arguments than the default, do the following. Note
that the newly-added arguments will override this script's default
arguments.
a. Click .