LEGRAND Raritan MCD Series, Manual, Page: 34 / 83

Base switch's model
name
Your 1st
‑
tier MCD switch's model name.
1st
‑
tier channel
The number of the 1st-tier channel where the 2nd ‑ tier MCD switch is connected.
Selected 2nd
‑
tier
channel
The number of the 2nd ‑ tier channel that is being accessed.
2nd-tier channel
names
2nd-tier channel names.
• Per default an active channel's name is 'PC'. You must customize the channel •
names. See Specifying Channel Names (on page 35).
Channel ID
Whenever you access a channel, a channel ID is displayed onscreen. By default, it displays for only 5
seconds. To extend the display time, see System Settings (on page 41).
If you turn on the channel scan function, the channel IDs are also displayed to indicate the channel that
is being scanned.
▶
Generic channel ID:
A channel ID on a standalone switch or on the base switch of a two-tier system looks similar to the
following.
Note: For information on two-tier systems, see Two-Tier System (on page 50).
34