LEGRAND Raritan Dominion User Station User Manual Download Page 251

Page: 251 / 284

Appendix A: System Settings

241

Default Shortcut Icons in the Main Toolbar

Shortcut icons in the Main Toolbar provides quick access to some system

settings. For information on the Main Toolbar, see

Main Menu, Port Navigator,

Toolbar

(on page 7).

This section introduces the following factory default icons.

Keyboard Layout Icon

Clicking the icon:

The keyboard layout switches among available languages. By default, the

following languages are available.

•

- English (US)

•

- French

•

- German

Right-clicking the icon:

A shortcut menu with these commands displays.

•

Layouts

: Changes the keyboard layout.

•

Keyboard Preferences

: Triggers the Keyboard Preferences dialog. See

Keyboard

(on page 218).

•

Show Current Layout

: Shows a keyboard image to indicate the current

layout.

Volume Icon

Clicking the icon:

A slider bar displays for you to adjust the volume.

Right-clicking the icon:

A shortcut menu with this command displays.

•

Mute

: Mutes the sound.

Network Icon

Summary of Contents for Raritan Dominion User Station




























































































































































































































































































Search results

Summary of Contents for Raritan Dominion User Station

Reviews:

LEGRAND Raritan Dominion User Station, User Manual, Page: 251 / 284

Search results

Summary of Contents for Raritan Dominion User Station

Reviews: