Appendix A: Using the KVM Client
105
Emulating the Card Reinsertion
If the authentication on the target server fails while the card is being properly
inserted into the card reader, you can attempt to solve the issue by removing
and reinserting the card.
The User Station is able to emulate the card reinsertion without physically
removing and reinserting the card.
To emulate the card removal and reinsertion:
1.
Click
to open the "Audio, Mass Storage and SmartCard Devices"
dialog.
2.
Click
.
Card Reinsertion Scenarios
The card is not detected in one of the following scenarios, you must reinsert
the card or emulate the card reinsertion to solve the issue.
The scenario where you must physically remove and reinsert the card:
a.
The smart card reader with a card inserted is physically connected to the
User Station and is configured to automatically connected to a specific
target server at startup.
b.
You establish and close the connections to that target server for several
times.
c.
When the card is no longer detected, PHYSICALLY remove and reinsert the
card.
The scenario where you need to emulate the card reinsertion:
a.
Both the smart card reader and audio device are configured to
automatically connected to a specific target server at startup.
b.
You establish a connection to that target server, and the audio device and
card reader with a card inserted are automatically connected to the target.
Summary of Contents for Raritan Dominion User Station
