LEGRAND PDU User Manual Download

Page: 63 / 505

Legrand PDU User Guide 63

2. The Energy Pulse page opens. By default the energy pulsing is turned off. DO NOT enable this feature

unless you have to use it.

a. To change the energy pulse settings, press

b. Press

to select an option.

c. Press

to confirm the selection, or

to cancel.

3. To return to the Main Menu, press

Inlet

An inlet's information is separated into two pages. Page numbers are indicated in the top-right corner of the
LCD display.



To show the inlet information:

1. Press

to select "Inlet I1" in the Main Menu, and press

2. The first page shows the inlet's active power (W), apparent power (VA), power factor (PF), and active

energy (Wh).

3. To go to other page(s), press

Summary of Contents for PDU

























































































































































































































































































































































































































































































































Search results

Summary of Contents for PDU

Reviews:

Related manuals for PDU

Brands by name

Popular brands

LEGRAND PDU, User Manual

Search results

Summary of Contents for PDU

Reviews:

Related manuals for PDU

Brands by name

Popular brands