Line Interactive UPS User Manual
Understanding the UPS Power Button
37
©2022 |
. All rights reserved.
Understanding the UPS Power Button
NOTE
Your UPS comes from the factory with the batteries fully charged and a one-time Transport
Mode function is enabled to minimize battery discharge.
If you press the power button while the UPS is in Transport Mode, the following message
appears for 10 seconds on the LCD.
After 10 seconds, the LCD and UPS turn off.
The first time you plug your UPS into an appropriately rated receptacle using the power cord (C), the system turns
off the one-time Transport Mode and the power button then functions as follows:
•
Press and hold the power button until the display shows “Release Button Turn On UPS.” The unit then
powers On – whether it’s in Line Mode (plugged in) or Battery Mode.
•
Press and hold the power button until the display shows “Release Button Shutdown UPS.” The unit then
powers Off.
•
When the UPS is On, in Line Mode, and you press and hold the Power button until you hear exactly 4
beeps, and then immediately release the button, the unit perform a manual battery self-test.
Power Button
UPS PowerLock
UPS OFF in 10sec
