50
overview
2
EXAMPLE 2: PROGRAMMING A HEATING COMMAND
ACCORDING TO TIME CONSTRAINTS
Your problem
During the week, you get up at 07:00 every morning.
You leave for work at 08:30 and get back at 19:00, but your
children stay at home on Wednesdays.
Your central heating installation consists of electric radiators
connected to power line carrier cable outputs.
You want the heating to switch on only when someone is in
the house and to switch off between 22:00 and the time you
get up in the morning.
The Legrand solution
You can create a heating command and programme it
according to your time constraints:
every Monday, Tuesday, Thursday and Friday:
COMFORT from 06:45; switch to ECO at 08:30;
switch to COMFORT at 18:45; switch to ECO at 22:00.
every Wednesday, Saturday and Sunday:
COMFORT from 06:45; switch to ECO at 22:00.
When the programme is created, it takes over the
management of your central heating system.
STEP 1: creating a heating command
1
press the Settings tab
2
select
Commands
3
press the
add
key
4
press
heating
5
Select the icon corresponding
to your central heating installation
radiators
STEP 2: recording the products
1
press the
key on the controller
For each cable output connected to the convectors:
2
press twice on the LEARN button
When all the products have been recognised, their IDs and
statuses are displayed on the controller screen.
3
press the
key on the controller
Follow the instructions displayed on the screen and wait for
the end of the learning procedure.
4
press