49
TOUCHSCREEN
SCENARIO
CONTROLLER
RAPID
O
VER
VIEW
V / Rapid
overview
1
EXAMPLE 1: CREATING A ‘LEAVING’ SCENE COMMAND
Your problem
You are leaving your house for a prolonged period (i.e. a
week-end, holidays, etc.). You want to be able to leave your
house quickly, with the certainty of not forgetting anything:
shut the roller shutters
retract the awning
switch off all your light sources
put the CMV on low speed
The Legrand solution
You can create a ‘We’re leaving’ scene command.
You record all the products in the state you would like them
to be in when you leave your house.
When you leave, press
we go out
to launch this scene and
activate everything at once!
STEP 1: creating a scene command
1
press the Settings tab
2
select
Commands
3
press the
add
key
4
press
scenes
5
select the icon
we go out
STEP 2: recording the products
1
press the
key on your controller
2
For each roller shutter
press the LEARN button of each command box
press the down button
3
For each outdoor shutter
press the LEARN button of each command box
press the up button
4
For each of your light sources
press the LEARN button of each switch
press the switch off button
5
For the CMV
press the LEARN button of the command box
press the low speed
button
When all the products have been recognised, their IDs and
statuses are displayed on the controller screen.
6
press the
key on the controller
The learning procedure is completed.
7
press
STEP 3: creating a scene shortcut
1
select the
we go out
icon using the navigation keypad
2
press the
key