This product may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details.
© 2018 Kenall Mfg. Co. All rights reserved.
www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144
2
INSTALLATION INSTRUCTIONS
SA-WM_F-7794_021820
4. Adjust so that plate is level/plumb and secure to wall.
5. Pull supply and ground wires from conduit or j-box so that they extends at least 8 inches from Wall Plate.
6. Lift assembly over Wall Plate and hook Hanger Bracket over Wall Plate’s top edge as shown in Fig 3. Feed
supply wire through Hanger Bracket into Fixture Arm and lower fixture by rotation on wall plate.
7. Secure Hanger Bracket/fixture assembly using two screws and lock washers (provided). See Figure 4.
8. Make electrical connections and secure them inside the Fixture Arm. See Figure 5.
9. Insert Wiring Cover into Fixture Arm and secure with provided screw. See Figure 6.
10. Caulk top and sides of Hanger Bracket at the wall with weatherproof sealant. Do not use sealant on
bottom edge.
FIGURE 4
FIGURE 3
FIGURE 6
FIGURE 5
For warranty information visit www.kenall.com/Resources/Certified-Performance-Warranties
WARRANTY
For technical assistance, call 1-800-4KENALL (1-800-453-6255).
CUSTOMER SERVICE
