LED Bollard
Instruction Manual
Cat. RGLLED001
1 Specifications
Cat No
RGLLED001
Voltage
12Vac
Power
1W
IP rating
IP54
CCT
2700K
Lumen output
100 lm (lamp only)
Replacement globe
1W G4 LED Bi-Pin LAMP
Mounting
Plastic Ground stake
Wiring connection
Jaw Lock connector
Housing Material / Finish
Stainless Steel 304
Lifetime (Lamp)
6000hrs @ 25˚C
Warranty
1 yr (Excludes Globe)
2 Globe Assembly
Box includes 1x LED 1W G4 lamp (in a separate box).
When installing the Ìrst time, twist open the opal diffuser and push in lamp
RGLLED001
3 Cable Layout
If your installation includes multiple lights, HPM strongly recommends that you limit individual
cable lengths to 20 metres, or use HPM heavier duty cable, otherwise lights may get progressively
dimmer towards the end of the cable (voltage drop). See section for accessories
If your installation requires a total of more than 20 metres of cable, consider running two seperate
cables from the transformer output.
It is recommended that the LED lighting does not exceed 50% of the load rating of the transformer.
Refer to section ‘Choosing a suitable transformer’ for further information
330mm
165mm
