LED GEO Spot Light H/SCAPE
Instruction Manual
Cat. GLLED003
1 Specifications
Cat No
GLLED003
Voltage
12Vac
Power
1W
IP rating
IP44
CCT
2700K
Lumen output
100 lm (lamp only)
Replacement globe
1W G4 LED Bi-Pin LAMP
Mounting
Keyhole
Wiring connection
Jaw Lock connector
Housing Material / Finish
Plastic UV Stabilised Black
Lifetime (Lamp)
6000hrs @ 25˚C
Warranty
1 yr (Excludes Globe)
2 Globe Assembly
STEP 1 Find 1x LED 1W G4 lamp in packaging (in a separate box).
STEP 2 Pry open the clear cover using a small screw-driver.
STEP 3 Push lamp in firmly into holder
STEP 4 Locate the clear cover on to the front face of body and push in firmly with fingers.
GLLED003
3 Cable Layout
If your installation includes multiple lights, HPM strongly recommends that you limit individual
cable lengths to 20 metres, or use HPM heavier duty cable, otherwise lights may get progressively
dimmer towards the end of the cable (voltage drop). See section for accessories
If your installation requires a total of more than 20 metres of cable, consider running two seperate
cables from the transformer output.
It is recommended that the LED lighting does not exceed 50% of the load rating of the transformer.
Refer to section ‘Choosing a suitable transformer’ for further information
