background image

Ceiling Fan Infrared Remote Control Kit 

Cat. No:

 

CFREMOTEH,CFREMOTEJ

Instruction Manual 

PLEASE READ ALL INSTRUCTIONS CAREFULLY. RETAIN FOR FUTURE REFERENCE. 

INSTALLATION MUST BE CARRIED OUT BY A LICENSED ELECTRICAL CONTRACTOR.

1.   The CFREMOTE range is compatible with HPM’s CF Series of 

Ceiling Sweep Fans only.

2.  CFREMOTEH is compatible with HPM Hang-Sure fans only. 

CFREMOTEJ is compatible with HPM J-Hook fans only.

3.  The infrared transmitter has a maximum working range of 10 

metres (unobstructed).

4.  The remote control cannot be used in combination with a wall 

mounted fan controller.

5.  The same remote control can be used to control several of 

HPM CF ceiling fans fitted with the receiver module.

6.  Dimming function works with dimmable halogen, 

incandescent and some LED lamps only. Compatibility with 

non-dimmable or CFL lamps is not guaranteed. Dimming 

levels will vary depending on the dimmable lamp.

7.  Fan can be directly connected using the compatible cable 

connectors on the Remote Control Kit.

Hand-held Remote

Mode

Operation

Timer Allows the fan to run 

for a further 2/4/6 

hours of operation 

before switching off 

automatically.  

Does not affect the 

light output.

Fan 

Speed

3 fan speeds can be 

selected.
FAN OFF will switch 

off fan when in 

Timer mode.

Light

3 light levels can be 

selected. Requires a 

dimmable lamp to be 

fitted in lighting kit.

  Important considerations

Hang-sure Bracket

Hang the fan on the bracket. 

Ensure bracket guide pin is 

fitted into slot on ball joint  

and that all wires are clear  

of the ball joint.

J-Hook Bracket

Hang the fan on the J-Hook.  

Ensure that all wires are clear of the rubber roller.

Position the receiver in the cowling.

Insert the receiver into the 

Hang-sure bracket.

Place the sensors on edge of 

cowling at opposite ends.

Tighten the 2 screws to the 

downrod.

Place the sensors on edge of 

cowling at opposite ends.

Fix the cowling to the bracket 

by tightening the 2 screws.

2

  

Mounting

CFREMOTEH

CFREMOTEJ

1

Specifications

Input voltage

230 - 240 V   a.c.   50 Hz

Standby Power

< 0.5 W

Output Rating

 Fan motor 65 VA max. 

Light 120 VA max.

Light Dimmer

Trailing Edge Dimmer

Box Contents

 Receiver

■ 

Wall mount bracket

■ 

Remote control (with CR2025 lithium battery included)

Safety screw must be installed after replacing battery.

Fig. 1

2H

6H

4H

Timer

2, 4 & 6 hour

All ON/OFF

Fan Speed

Low, med & high

Light

Low, med & high

Wall-mount 

bracket 

included

2H

6H

4H

!

FOR CFREMOTEH

Reviews: