TRAILING EDGE DIMMER
Instruction Manual
Cat.No.
700TM/1000TM
1
2
Operation
Technical Characteristics
Please read carefully:
Read through these instructions completely before commencing installation. Retain for future use. This product should be
installed by a licensed electrical contractor or similarly qualified person.
■
Turn the knob clockwise to increase brightness.
■
Turn the knob anticlockwise to decrease brightness.
■
Over-temperature protection:
If the dimmer gets too hot (due to overloading or insufficient de-rating), the lamp brightness is
automatically reduced. After the dimmer cools down, normal operation is automatically resumed. Be sure to correct the cause of
the high temperature.
■
Nominal Input Voltage: 230-240 V a.c. 50 Hz
■
Operating Temperature: 0°C to 50°C
■
Terminal Capacity: 2 x 1.5 mm²
Notes:
1. Not compatible with all dimmable LEDs. Bench test prior to installation. Dimming range may be reduced with some models.
2. When used in ambient temperatures greater than 25°C, the dimmer must be de-rated by 10% for every increase of 5°C.
WARNING - DO NOT MEGGER THIS PRODUCT
Load Type
Minimum Load
Maximum Load
700TM
1000TM
Dimmable LED Lamps
●
DLI70 Downlights
1 Lamp
28 Lamps
40 Lamps
●
AZA+, DLI90, DLI110, DLI125 & DLI150 Downlights
●
R80 Dimmable Globe
1 Lamp
21 Lamps
30 Lamps
●
DLS, Dalia, Azalea & Freesia Downlights
●
Luna Panel Lights
●
Calla Step Lights
●
Zinnia Starlights
1 Lamp
14 Lamps
20 Lamps
●
All other models (See Note1)
1 Lamp
14 Lamps or 700VA
(whichever is smaller)
20 Lamps or 1000VA
(whichever is smaller)
●
Incandescent Lamps
●
Halogen Lamps
●
Electronic Transformers
10VA
700VA
1000VA
●
Fluorescent Lamps
●
Wirewound Transformers
●
Fan Motors
Not suitable