Smart LED Light Strip Kit White and Color with HomeKit Technology
Installation Instructions
Keep your individual HomeKit Setup Code in a secure area. The code is
unique to your device.
Catalog Number(s): HKT1
Item
Name
Description
1
Power Adaptor
24VDC, 1.5A supply
– For indoor use only
2
Controller
Connects to the strip and power adaptor.
3
6-Pin Connector
Do not disconnect the strip from the controller.
4
Point of Extension
If desired, strip extensions (HKT2) can be added here.
5
Designated Locations for
Cutting
The strip can be shortened by cutting along the pre-designated
locations indicated by scissors.
6
Reset Button
Reset the device by using a paper clip to press the reset button for 10
seconds until the light strip quickly flashes red 3 times. The device will
then restart.
Getting to Know Your Device
This kit includes:
o
2m (6.5ft) self-adhesive light strip
o
Controller
o
Power adaptor (24V, 1.25A)
The strip can be shortened by cutting at designated locations to a minimum length of 34cm (1.1ft).
The strip can be extended up to 10m (32.8ft) by adding extensions (HKT2). Each extension is 2m (6.5ft).
