© 2019 Legrand All Rights Reserved rev.03/20 QSG_29977
6500 Poe Avenue
Dayton, OH 45414
Phone 800.293.4970
www.c2g.com
Specifications
Specifications
CPU
Intel Celeron J1800 Processor, @ 2.41GHz 4 cores
Memory
2GB DDR3
Display
Integrated Intel HD Graphics, 1x HDMI and 1x VGA
Keyboard and Mouse
USB keyboard and mouse (not required and not included)
Peripherals
• USB 2.0 ports (3x)
• SS USB 3.0 port (1x)
• Network gigabit interface (2x)
• VGA Video out port (1x)
• HDMI Video out port (1x)
• Audio in via 3.5mm port (1x)
• Audio out via 3.5mm port (1x)
• RS232 port (1x)
Operating System
Ubuntu 18.04 LTS
Temperature/Humidity
Operating: 0 ºC to 50 ºC, Storage: -20 ºC to 80 ºC
Humidity: 10% to 90% (non-condensing)
Dimensions
5.24 x 5.00 x 1.38 inch (133 x 127 x 35 mm)
Weight
1.5lbs (0.7kg)
Accessories Included
External 12VDC @ 2A Power Adaptor
Regulatory
FCC, CE, RoHS, WEEE
Order Information
29977 Network Controller for 4K HDMI over IP
Please download the complete 29977 Network Controller for 4K HDMI over IP product
operation manual from the C2G web site (at
Network Controller for
4K HDMI® over IP (29977)
Quick Start Guide
Overview
The C2G Network Controller for 4K HDMI over IP (29977) is a Linux-based PC that allows
users to control hub-installed C2G products via an Ethernet Web interface.
When installed on a local area network (LAN), the C2G Network Controller will scan the
LAN for connected C2G products allowing the user to auto-discover, configure and control
these products through an Ethernet Web interface.
Applications
Application is for control of the C2G Audio/Video over IP product line. The Network
Controller can be used to implement a virtual matrix, splitter, video wall and other
configurations over IP.
Installation
1.
Connect the Ethernet LAN 1 port of the Network Controller to the Ethernet switch and
then apply power to the unit (the Ethernet LAN 1 port should be connected before
applying power). Turn on the Power Switch. Note that LAN 2 port is configured as a
DHCP client and can be utilized for control purpose.
2.
The unit will go through a power-up sequence.
3.
With the use of a computer and a browser, connect to the Network Controller web
page.
The default IP address is: 192.168.168.50
The computer will need to be on the same local IP network segment.
If the unit is configured in DHCP mode, then the IP address will be assigned by the
DHCP/network server. Check with an IT administrator for available IP addresses.
4.
The next and final step is to setup and configure the Network Controller via the
controller web interface. In order to accomplish this, navigate to the C2G web site (at
) and download the 29977 Network Controller for 4K HDMI over
IP product manual. The manual will provide the necessary instructions to complete
the remaining system setup and configuration.
C2G Warranty
At C2G we want you to be totally confident in your purchase.
That is why we offer a warranty on this device. If you experience
problems due to workmanship or material defect for the duration
of this warranty, we will repair or replace this device.
To request a Return Merchandise Authorization (RMA) number,
contact customer service at [email protected].
