LEGRAND BTicino MyHome HOMETOUCH 3488, Installation Manual, Page: 60 / 72

HOMETOUCH
Installation Manual
60
3. Select the type of Camera/Entrance Panel among:
Public
: it gives the possibility of displaying the images from a Camera/Entrance Panel installed
in a common area, visible to all residents (if an apartment interface has been installed)
Private : it gives the possibility of displaying the images from a Camera/Entrance Panel installed
in the own apartment (if an apartment interface has been installed)
CCTV : it gives the possibility of displaying the images from a Camera of a video video
surveillance system integrated with the video door entry SCS system.. The image is displayed
for three minutes and the camera cycling is not possible. For the camera cycling or multi-vision
functions, connect interface 347400 to a device output (e.g. Digital Video Recorder) performing
these functions.
Camera
This section can be used to configure the cameras that will give users the possibility of displaying
the images from their own apartments, the apartment block area, or a CCTV surveillance system.
Once configured, they can be entered in the favourites in the Home Page.
1. Touch to enter the Camera section
2. Touch to add a Camera/Entrance Panel
Note
: for apartment blocks without apartment interface and in single-family homes, cameras must be
considered as PRIVATE
Note : to realize this integration, refer to the guides or the diagrams of the SCS/coaxial interface 347400
MYHOMESERVER1
Device reboot
Restore factory
Video door entry
ADVANCED
Add new Camera
Camera Main Intercom Commands
2
1
ADD NEW CAMERA
Name
Public camera
Address
0
Private
Public
CCTV
Type
MYHOMESERVER1
Device reboot
Restore factory
Video door entry
ADVANCED
3