LEGRAND BTicino MyHome HOMETOUCH 3488, Installation Manual, Page: 56 / 72

HOMETOUCH
Installation Manual
56
Video door entry system
General settings
Scroll down to see the other parameters
1. Touch to enter the Video door entry settings section.
2. Enter the N configurator values to set the address device and enter the P configurator value to
set the address of the EP of which you can open the Door Lock with IU idle, and to which you
can send the auto-on command
3. Select if the device is the one associated to the DOOR ENTRY for HOMETOUCH App, and
therefore the only one enabled for transferring incoming calls to the App and to manage the
answering machine.
Only one device of the system may be associated to the App
4. Enable the “Staircase light” function
5. Enable the “Inductive loop” function.
No
Yes
Do you want to connect this touchscreen with the
DOOR ENTRY for HOMETOUCH App?
Attention: only a touchscreen for one plant can be
connected to App
N
1
P
0
Main Commands Intercom Camera
MYHOMESERVER1
Device reboot
Restore factory
Video door entry
ADVANCED
2
3
1
No
Yes
Main Commands Intercom Camera
MYHOMESERVER1
Device reboot
Restore factory
Video door entry
ADVANCED
Staircase light
Disabled
Teleloop
Disabled
5
4