LEGRAND BTicino MyHome HOMETOUCH 3488, Installation Manual, Page: 23 / 72

HOMETOUCH
Installation Manual
23 22
Connect the device to the home router as per the diagram
• IP address, network mask and DNS : typical parameters of TCP/IP protocol networks,
necessary for the identification of the device within the local network.
• Gateway : IP address of the router/access point.
Note : before changing the default values, contact the network administrator.
In addition to preventing the service from becoming active, wrong values can cause malfunctioning
during the communication of other network devices.
Connection to the network using Ethernet technology
1. Touch to select the Ethernet technology
3. Enter the network parameters
4. Touch to continue
2. Touch to disable the DHCP mode and to enter the network parameters manually
DHCP is enabled as standard. Touch next to continue, otherwise
MYHOMESERVER1 SYNCHRONIZATION
Connection Type
IP Address
Skip
WiFi Ethernet
Manual
DHCP
1
2
SYNCHRONIZATION
Enter the network parameters
IP Address
Gateway MAC
Primary DNS Secondary DNS
Network mask
192.168.1.204 255.255.255.0
192.168.1.200
192.168.1.200 00:03:50:AF:00:85
3
4