LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 171 / 211

PRO1 Sentry Switched DC PDU
171 of 211
set location
Sets the system location string.
Command Syntax
set location <location string>
Parameters
The set location command uses the following parameter:
location string Location string text for system location. 0-63 characters.
Command Access
Admin level only
set outlet
Sets outlet configuration values.
Command Syntax
set outlet branchevent [disabled | enabled] <name | id | ALL>
set outlet chglogging [disabled | enabled]
set outlet email [disabled | enabled] <name | id | ALL>
set outlet load [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set outlet load hyst <value>
set outlet name <name | id> <new name>
set outlet snmpt [disabled | enabled] <name | id | ALL>
set outlet watts [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set outlet watts hyst <value>
Parameters
The set outlet command uses the following parameters:
chglogging Sets logging for system outlet state changes
email Sets email notifications for outlet events.
extondelay Sets an extra on delay when turning on an outlet. 0-900 seconds.
host
Sets the hostname for an outlet for script or shutdown actions.
0-63 characters.
hyst Sets the hysteresis between event state and recovery.
load Sets the current load for an outlet. min 0.0A, max (max current) in show
outlets command, hyst 1.0-10.0A (default 1.0A)
lock Sets if control actions are disabled for an outlet after wakeup state is applied.
pf Sets the power factor. min 0.00, max 1.00, hyst 0.0-0.20 (default 0.02)
rebootdelay Sets an extra on delay when rebooting an outlet (5-600 seconds).
script Sets to additionally send request to have shutdown agent run a script before
shutting down the host.