Janu
ary 201
9
154 Legrand PDU User Guide
Setting Default Measurement Units
Default measurement units are applied to all Legrand PDU user interfaces across all users, including users
accessing the Legrand PDU via external authentication servers.
For a list of affected user interfaces, see
User Interfaces Showing Default Units
(on page 153). The front
panel display also shows the default measurement units.
Note: The preferred measurement units set by any individual user or by the administrator on a per-user basis
will override the default units in the web interface and command line interface. See
Setting Your Preferred
Measurement Units
(on page 152) or
Creating Users
(on page 146).
To set up default user preferences:
1. Click User Management > Default Preferences.
2. Make changes as needed.
Field
Description
Temperature Unit
Preferred units for temperatures --
(Celsius)
or
(Fahrenheit).
Length Unit
Preferred units for length or height -- Meter or
Feet.
Pressure Unit
Preferred units for pressure -- Pascal or Psi.
Pascal = one newton per square meter
Psi = pounds per square inch
3. Click
Save.
User Interfaces Showing Default Units
Default measurement units will apply to the following user interfaces or data:
Web interface for "newly-created" local users when they have not configured their own preferred
measurement units. See
Creating Users
(on page 146).
Web interface for users who are authenticated via LDAP/Radius servers.
The sensor report triggered by the "Send Sensor Report" action. See
Send Sensor Report
(on page
217).
Front panel LCD display.
