Janu
ary 201
9
118 Legrand PDU User Guide
Creating an Outlet Group
You can create an outlet group if you often have to power on, off or cycle the same outlets at a regular
interval.
Note that an outlet can be the member outlet of one or multiple groups.
To create an outlet group, you must have either permission below.
Administrator Privileges
Change Pdu, Inlet, Outlet & Overcurrent Protector Configuration
To create an outlet group:
1. Click
.
2. Type the group name.
3. Select the outlets you want in the Available field.
To select all outlets of the PDU, click Select All.
4. To delete any selected outlet(s), select an outlet's
in the Selected field.
To remove all selected outlets, click Deselect All.
5. Click
Save.
Tip: Legrand PDU allows you to assign the same name to diverse outlet groups. If this really occurs, you still
can identify different groups through their unique index numbers.
Outlet Group Power Control
You must have either permission below to power control any outlet groups.
Administrator Privileges
Switch Outlet Group
You can switch one or multiple outlet groups at a time on the Outlet Groups page.
To switch one single outlet group only, there are two methods -- either the Outlet Groups page or individual
group page.
To switch one or multiple groups on the Outlet Groups page:
This method allows you to switch more than one outlet group simultaneously.
1. Click
to make checkboxes appear in front of outlet groups.
Tip: To perform the desired action on only one outlet group, you can simply click that group without
making the checkboxes appear.
2. Select multiple outlet groups.
