LE11416AB
2
3
4
This product is a connected accessory which requires you to buy and install one of these first:
- … with Netatmo » connected starter pack and «… with Netatmo » connected power outlets,
switches (with dimmer option).
- Connected lighting micromodules.
- radiant with Netatmo Gateway and radiant with Netatmo Switch, Dimmer or Receptacle.
- adorne with Netatmo Gateway and adorne with Netatmo Switch Dimmer or Receptacle.
1
2
3
4
Configurable
scenes
Frequency band: 2.4 - 2.4835 GHz
Power level : < 100 mW
OR
OR
OR
Gateway
power
module
Gateway Power
Outlet and Home/Away
wireless Switch
radiant
Gateway
adorne
Gateway
Contents:
Pocket remote control with
4 scenes
4-scene pocket remote control
0 676 95
Start configuration of the 4-scene pocket remote control
Prepare the 4-scene pocket remote control
1
2
3
4
1
2
3
4
1
2
3
4
Remove the
protective tab
press
one of the buttons
on the 4-scene pocket remote control
The LED on the 4-scene pocket remote control will
flash green and then switch off.
Your 4-scene pocket remote control is ready to
use.
Press
the
gateway power module
configuration button or the middle of the
Home/Away
wireless master switch
until the
LED briefly lights up green, then
release
. All
the LEDs on the wired products light up with a
steady green light.
To complete your installation,
briefly
press the
gateway power module
configuration button
or briefly press the middle of the wireless
master switch.
All the LEDs on the products will switch off.
Press
the
gateway EZ button
for 5
seconds and let go. The LED will turn solid
green.
Customise your scene
From the
Legrand Home + Control application
(Settings/
Scene section)
Follow the instructions in the guide
Complete the configuration
OR
< 1 s
< 1 s
To complete your installation, briefly press
the gateway EZ button.
All the LEDs on the products will switch off.
US :
Question? We’re here to help.
Phone: 1-877-833-3303 8:00 a.m. to 8:00 p.m. EST (M-F)
Email: [email protected]
Chat: https://wwwlegrand.us/radiant/smart-lighting.aspx
(Click on the chat icon to open a dialogue box)
Outside US:
www.legrandoc.com/064875
Legrand – Pro and Consumer Service
BP 30076 87002 Limoges CEDEX FRANCE
www.legrand.com
Reset To Factory Default:
To manually reset the device to factory defaults, press and hold the EZ Button for
10 seconds until you see the LED blink red, then release. The LED will turn off when
the reset is complete.
Replacing the battery
low
battery
lithium battery
SIMPLIFIED
EU
DECLARATION OF CONFORMITY
The undersigned,
Legrand
declares that the radio-electric equipment referred to in these instructions
complies with directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the following website:
www.legrandoc.com
1
2
3
4
1
