LEGRAND 0 672 25 Manual Download Page 1

1/5

Catalogue number(s): 0 672 25 - 0 784 85 -  5 740 46/96

Switch sensor - PIR 

SCS

Technical data sheet: S000077071EN-2 

Updated: 11/06/2014 

Created on: 17/12/2012

  1. USE

This device allows a light source to be controlled automatically through 

the detection of presence in the surveillance zone.

Presence sensor with 180° detection angle.

Detection type: infrared (PIR) 

Type of fitting: wall flush-mounting

  2. TECHNICAL FEATURES

Voltage: 27 V

=

No-load power consumption: 12 mA

Connection between the sensor and the controller: BUS/SCS cable

Wiring: 2 x 0.35 mm

2

Flush-mount box: 40 mm min.

Weight: 60 g

Impact resistance: IK04

Penetration by solid and liquid matter:  - IP20 mechanism alone 

-  IP41 installed product  

with finger plate

Usage temperature: - 5°C to + 45°C

Storage temperature: - 20°C to + 70°C

Type of terminals: screw

CONTENTS Page

1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

2. Technical characteristics  . . . . . . . . . . . . . . . .1

3. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

4. Connection   . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

5. Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

6. Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

7. Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

8. Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . .3

9. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4

10. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . .5

11. Standards and approvals . . . . . . . . . . . . . . . .5

12. Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . .5

0 672 25

0 784 85

5 740 46 

5 740 96

  3. DIMENSIONS

35

45

45

51

  4. CONNECTION

Pressing the auxiliary control enables the load to be switched on or off 

manually. If the control is not pressed, the sensor will cut off the load 

at the end of the time delay or when the light level threshold has been 

reached.

BUS/SCS

LEARN 

button

LED

Sensor /  

PIR Sensor

Light level 

cell

Detection 

LED

Reviews: