Connected cable
outlet
x 1
x 1
or many
1gang or 2gang wireless light switches for all other control
points (not included in this pack)
Connected cable outlet
AND
x 1
or many
AND/
OR
+ 45° C
+ 5° C
200 000
actuations
50/60 Hz
2,5 mm
2
230 Vac
Maxi.
3000 W
Electrical characteristics
Finishing plate
The circuit must be protected with a 16A breaker
Pack contents
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo» connected starter pack first.
Before you start : wiring precautions
To control a connected cable outlet, only use these products :
LE11208AA
Connected cable outlet
0 648 47/51/63/79/82/83/98
Remove the existing cable outlet
(with or without pilot wire)
14A 230V~
2,5 mm2 rigid wire
(recommended)
14 A - 230 V~
3000 W maxi
OFF
Switch off the power at the main circuit
breaker
Make sure that the power is
off before continuing with the
installation.
CASE N° 1 - Appliance installed without pilote wire
(By default factory mode)
Note : in that case, the connected cable outlet can be controlled by
wireless light switches.
Necessary safety precautions
Frequency bands: 2.4 - 2.4835 GHz
Power level: < 100 mW
N (neutral) = blue
L (live) = all except blue and yellow
(earth) = green/yellow
Wire the connected cable outlet
2
9 mm
Ø 3.7 min
Ø 12.5 max
N
FP
Appliance installed without pilot wire
Authorized cables H05 VVF or H07 RNF
For cables Ø maxi. 12,5 mm
Ø mini. 3,7 mm
Wire the appliance on your connected cable outlet
3
Remove the existing cable outlet
Remove the existing cable outlet
OFF
Switch off the power at the main circuit
breaker
Make sure that the power is
off before continuing with
the installation.
CASE N° 2
Appliance installed with pilot wire(*) and without energy
manager
Pilot wire function activable in Legrand Home+Control app.
Note : enabling the pilot wire feature makes the wireless light
switches inoperable on the connected cable outlet.
(*) Pilot wire 4/6 orders (read your appliance instruction sheet)
Necessary safety precautions
4
