4/11
Technical data sheet: S000094312EN-1
Updated:
Created: 20/09/2017
Cat. No(s): 0 026 54
KNX modular dimmer 2 x 300 W
5. OPERATION
(continued)
5.3 Manual mode
Manual mode is used to switch on and off or dim on each channel.
For dimming, the dimming level is independent of the KNX
programming.
After a short press on the manual button, the corresponding LED comes
on with a steady red light, and channels 1 and 2 can then be switched
ON/OFF with a short press on the up and down buttons of each
channel.
A long press on these buttons will brighten or dim the light.
< 2 s
< 2 s
< 2 s ON/OFF
> 2 s +/-
2
1
To exit manual mode, press the “Manual” button briefly, and when the
corresponding LED goes off, the product has switched to automatic
mode.
5. OPERATION
(continued)
5.4 NFC settings
The parameters can be set using NFC after downloading the “Close Up”
app from Google Play or www.legrandoc.com with an NFC-compatible
Android mobile phone.
The device must not be connected to the mains during parameter
setting.
See video below
