Teeth
1. Detach
teeth VC9106
by driving (2)
roll pins VH0467
from carriage and teeth using pin
punch.
2. Reattach new teeth by placing the teeth on carriage and driving roll pins back in place.
Piston and Jaws
1. Detach
body VC9100
from rest of tool by removing (4)
VH0051 SHCS
. Separate by
pulling the carriage/piston assembly straight out from body.
2. Remove piston
o-ring VH0455
.
3. Remove
5/16 – 24 nut VH0454
from
piston rod VC9113
. If necessary, apply heat as
needed to breakdown thread lock adhesive on threaded end of piston rod.
4. Remove
piston, bumper
and
spring
(
VC9114, VC9120
and
VC9123
.)
