Power Foundations Owners Manual 99300787-k
11
3 inches MAX
.
figure 7: headboard cross member location must not exceed 3 inches
(76.2mm) from the top of the mattress.
HEAdbOARd bRAckEt iNStALLAtiON
Install headboard brackets to the bed base frame*. When attaching (2)
twin size units to a king size headboard an optional swing hinge kit (see
accessory section) may be used to connect the twin units.
NOTE: It is important to position the bottom of the headboard cross
member a maximum distance of 3 inches (76.2mm) between the
headboard and the top of the mattress (FIGURE 7). Do not exceed 3
inches (76.2mm).
iNStALLAtiON
FAILURE TO FOLLOW HEADBOARD BRACkET
INSTALLATION INSTRUCTIONS MAY CAUSE
HEADBOARD BRACkET INTERFERENCE WITH
BASE FOAM DURING BED OPERATION. BASE
FOAM OR BASE COvER DAMAGE COULD
RESULT.
NOTE
* S-cape
®
and S-cape
®
Platform are Type A bed base frames.
Silhouette™, Pro-Motion™, and Bronze are Type B bed base frames.
