Phone:
1-510-770-1189 | Fax
:
1-510-217-9461 | Web
:
www.ledonedistribution.com
|
E-mail: i
POST TOP LIGHT INSTALLATION INSTRUCTIONS
LOD-PT60W-XXK POST TOP LIGHTING FIXTURE
LOD-PT80W-XXK POST TOP LIGHTING FIXTURE
LOD-PT150W-XXK POST TOP LIGHTING FIXTURE
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
.
Fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is
required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.
FIXTURE ASSEMBLY
POLE MOUNTING
1. Feed the (3) Housing wires through one of the three
Rods.
2. Screw the top of (3) Rods into the Housing. Be sure the
Housing clips are properly engaged onto the Rods.
3. Feed Fixture Wires through the Tenon Pole Adaptor.
4. Slide Tenon Pole Adaptor on three Rods. Be sure the
notches face the inside of the Tenon Pole Adaptor.
5. Put the Rubber mat into the Adaptor
6.Tighten the (3) Set Screws at the Tenon Pole Adaptor to
secure Rods.
1. Make the wiring connections with UL approved
connectors knot the wires for strain relief.
2. Tenon Pole Adaptor can fit tenon with 3” or 2 3/8”
diameter. Slip Tenon Pole Adaptor over tenon. For 3”
tenon u
se shorter (3/8”) tenon set screw and for 2 3/8”
tenon use longer (7/8”) tenon set screws to secure the
fixture to the tenon.
Tenon Pole Adaptor
Rods (3)
Housing
Housing Wires
Housing Wires
Set Screw
Rubber mat
Screws
Screws
