1-2 FEATURES & BENEFITS
Your new laminator has several standard features that set it apart from other models.
•
Intelligent heat controllers
simultaneously display
both the set temperature and
the actual temperature. The microprocessor-based control quickly learns to
anticipate the heat demand of each job and keeps the actual temperature within a
few degrees of the set temperature.
•
Laminating and pull rollers
are covered with quality silicone rubber for superior
release, higher lamination quality and easier cleaning. The laminating rollers and
pull rollers are interchangeable.
•
Removable heat shoes
are teflon coated to reduce film abrasion. They can easily
be unplugged and taken off to facilitate cleaning or replacing the laminating rollers.
Built-in retractable slitters
save an enormous amount of cutting time by trimming
away side scrap during the lamination process. The two heads can be adjusted
independently with great precision, even while the laminator is running.
•
Forced air cooling
is essential when running thicker films, because the lamination
needs to be cooled to get good results.
•
Easy access
controls
are conveniently located and grouped for effective operation.
•
The
safety guard
is built into the feed tray to make sure it will always be in place
when laminating.
•
The
precision feed tray
has moveable left and right side quides and can be
replaced with the optional Power Feed Tray in seconds.
•
Laminating and pull rollers
are covered with quality silicone rubber for superior
release, higher lamination quality and easier cleaning. The laminating rollers and
pull rollers are interchangeable.
•
Very strong steel cores.
These prevent roller flexing and insure uniform pressure
across the width of the laminate, giving you the best quality lamination available in a
medium-duty commercial machine.
•
Controls to open and close the laminating rollers.
The controls make threading
easier and allow even heating of laminating rollers during warm-up.
•
100% Made in the U.S.A.
6