background image

17

BATTERY

To unlock the battery and remove it from the frame, follow the steps 
listed above in reverse order.

 Be sure to remove the keys from the 

battery before removing the battery from the bike. If the keys are still 
in the battery, it will prevent it from being removed from the frame.

Use caution when unlocking and removing your 

battery from the frame as it may slide out when the 

bike is folded. If your battery impacts the ground 

and is damaged, discontinue use and contact 

Lectric eBikes immediately.

KEEPING YOUR BATTERY HEALTHY

•  If you know you won’t be using the battery for more than a few 

days, keep it charged at about 75% capacity. At 75%, the battery 
will degrade less than at higher charge levels.

•  Periodically check your batteries charge level about once per 

month and charge back up to 75% if necessary.

•  If you want to increase the number of cycles your battery will last 

for, charge your battery to 100% a few hours before you plan to 
ride it. For example, if you ride the bike and the charge level falls 
to 50% but you plan to use the bike again in a few days, wait until 
the night before you plan to use it again to charge it up to 100%. 
When the battery is not in use this is healthier for the individual 
cells in the long term.

Summary of Contents for XP 2.0










































Reviews: