manualshive.com logo in svg

LeCroy USB Protocol Suite Advisor T3, User Manual

Share
Download
LeCroy USB Protocol Suite Advisor T3 User Manual Download Page 127

USB Protocol Suite

 

User Manual

Chapter 5: Reading a Trace

LeCroy Corporation

 113

5.33 View Decoded Transfers

After you set Display Options, the Trace View screen is re-drawn to display decoded 
transfers in the colors and format you selected.

When you instruct the Analyzer to display USB transfers, the components of each 
transfer are collected from the current recording and are grouped below each decoded 
transfer. Each transfer row shows a transfer with a unique numeration, a label, and 
color-coded decoding of important data.

Note

: If CRC errors are found in a DATAx (2.0) packet or a DP (3.0) packet, the data in 

that packet will not be promoted to the Transaction, Transfer, and so on, levels above, 
since it is assumed that the data will be re-sent. The data count will show as 0 Bytes.

5.33.1 Expanded and Collapsed Transfers

You can expand a specific transfer to view its parts, which are grouped and indented 
below the transfer. 

Summary of Contents for USB Protocol Suite Advisor T3





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands